To pull a crossbow back, you need to first place the foot stirrup of your crossbow onto the ground. Then, grab onto the bowstring using one hand on either side and push down with both feet as you lift up with your arms. When pulling, make sure that you are pushing straight down and not…
No, you cannot use a shotgun during muzzleloader season in Michigan. Muzzleloader season is the period of time each year when hunters are allowed to hunt with firearms that use black powder or an approved substitute as the only propelling force. Shotguns, which fire multiple projectiles at once, do not qualify for this type of…
No, it is not okay to leave a crossbow cocked overnight. When the bowstring is kept under tension for long periods of time, it can weaken and cause it to break when fired. Additionally, the fibers on the string may come loose and create an inconsistent shot. This could lead to inaccurate shooting or even…
Sighting in a muzzleloader requires patience and concentration. First, make sure that the rifle is unloaded and the barrel is clear of any debris or obstructions. Next, set up a target at the desired range. It’s helpful to use a shooting rest or sandbags for support if possible. Now adjust the rear sight until it…
Sighting in a crossbow scope requires patience and practice. First, select an appropriate target from 20 to 30 yards away. Secure the bow in a stable position such as on a shooting bench or crossbow vise so that it does not move during adjustment. With your eye behind the scope, take aim at the center…
The safest way to unload a muzzleloader is by discharging all powder, pellets, and projectiles from the barrel. This should be done in an outdoor area away from any combustible materials. Always wear eye protection when discharging a muzzleloader and point the gun in a safe direction away from people or property. Once unloaded, inspect…
A crossbow can be left cocked for a long period of time, but it is not recommended. Leaving the bowstring in a cocked position increases tension on the limbs, which can cause them to weaken over time and possibly fail when fired. The amount of time that the bowstring should remain cocked will depend on…
A muzzleloader trajectory zeroed at 50 yards means that the bullet fired from the muzzleloader will hit the target at a point of aim (POA) without adjustment. This can be achieved by setting the sights on the gun to match where the bullet is expected to strike at 50 yards. At this distance, it is…
The Halo 4X32 Crossbow Scope Yardage Lines are a helpful feature that makes it easier to judge the distance of your target. The four horizontal lines on the reticle represent 10 yard intervals, ranging from 20 yards all the way up to 80 yards. This allows you to quickly and accurately estimate where your shot…
Snapping a cap before loading your muzzleloader is an important safety measure. A snap cap is a dummy round, which looks like a live cartridge but does not contain gunpowder or any other combustible material. By placing the snap cap onto the nipple of your muzzleloader and pulling the trigger it allows you to check…